Renovation in the bathroom is quite a difficult task. First, this room has almost all engineering communications (water supply, sewage, ventilation, electrical wiring) and installed sanitary ware. And all this usually changes during the repair process. Secondly, materials for bathroom repairs should be selected taking into account the fact that humidity and temperature are often high in this room, so all coatings must be resistant to such influences.
Therefore, despite the fact that the bathroom is, as a rule, a small room, its repair requires a lot of labor, time and money. What kind of work will have to be done during the bathroom remodel sacramento? Let’s consider the process in stages.
Planning and scope of work
The first stage of repair is planning. It is necessary to take measurements in the bathroom and develop a design project for the repair, that is, to present how the room will look after all the work is completed. Having decided on the scope of work, you can make a list of necessary purchases – materials and, perhaps, some tools.
Now you can start the preparatory stage, it includes the following operations:
- Dismantling of sanitary ware. It is necessary to remove and remove the sink and bathtub from the room. If the bathtub is made of cast iron, it will probably have to be split, since it is not always possible to take it out of the room whole.
- Dismantling pipes. Water supply and sewage pipes should be dismantled.
- Dismantling of old wall, floor and ceiling coverings. If tiles were laid in the bathroom, then this work will be quite time-consuming. Although it is quite difficult to remove old oil paint from the walls.
- Dismantling of old doors. Even if the door is not planned to be changed, it should be removed from the hinges during the repair.
After removing all coatings, all surfaces should be carefully inspected for traces of mold. If the fungus is detected, it will be necessary to use special antiseptic solutions to combat mold.
Another serious stage is the preparation of surfaces for processing. The preparation process depends on the selected type of treatment.
Installation of pipes
At the planning stage, it will be necessary to decide how the installation of pipes will be carried out – hidden or on the surface. As a rule, most owners choose the first option, because it is more aesthetic, and the room will look more attractive.
The risers, if they are located in the bathroom, are hidden by building a box around them. Installation of plastic pipes is not particularly difficult and can be done independently.
If hidden installation of pipes is planned, then before processing, it is necessary to test the assembled systems in action to exclude leaks.
Installation of electrical wiring
When drawing up a design project, one should not forget about planning the lighting scheme. As a rule, today few people limit themselves to the installation of a single lamp, most plan to install several light sources.
And if a suspended or stretch ceiling is installed in the bathroom, it will be possible to install built-in lighting. In addition, you should provide for the installation of a socket with grounding for connecting the washing machine or the electrical equipment of the shower cabin.
Installation of electrical wiring is one of the most difficult stages of renovation in the bathroom, so if you are not confident in your abilities, it is better to seek help from professionals.
Pay attention! Step-by-step bathroom renovation should not be harmful to your health, so strictly follow all generally accepted measures to ensure safety. Current-conducting and electrical elements require especially careful handling. Disconnect the voltage before the corresponding works. All electromechanical tools have instructions for safe use, be sure to read them before operating the construction equipment.
Then you should finish lining the ceiling, walls and floor. Finishing materials are selected at the planning stage, the main thing is that they are moisture-resistant and durable.
Most often, ceramic tiles are used for the walls and floor in the bathroom, but you can also choose other options. The walls can be painted with moisture-resistant paints or covered with decorative plaster. It can be installed on the frame or glued directly to the base of the plastic panel.
When choosing finishing options, you should think about ways to decorate the interior. For example, you can use a mosaic to make an apron in the bath or a “frame” for a mirror. Interesting and original decor can be created using glass or mirror tiles.
The ceiling in the bathroom, as a rule, is either painted or some kind of suspended structure is mounted. Moisture-resistant plasterboard, plastic panels, metal rails or other materials can be used for binding to the frame.
A lot of attention will have to be paid to the execution of the floor finish. Options are also possible here, but in any case, the floor should be waterproofed beforehand. For finishing the floor, ceramic floor tiles are most often used, recently the technology of manufacturing polymer bulk floors is gaining popularity.
Installation of new sanitary ware
After finishing works, you can start installing new sanitary ware – bathtub, shower cabin, washbasin, etc. When choosing sanitary ware, it is worth paying attention to the fact that it is made in a single style that would harmonize with the finished decoration.
Completion of repairs
The final stage of bathroom renovation consists in arranging the furniture and decorating the interior. Now the renovation in the bathroom can be considered finished.
Leave a Reply